Mới 90% Allen & Heath
Remote commissioning
KTV Audio Remote Tuning Support
Remote tuning support for used KTV audio systems: gain structure, feedback control, DSP presets and lighting scenes set up over a video call, with written settings you can keep.
Bao gồm
- Pre-call checklist and measurement sheet
- Video walkthrough of gain structure and routing
- Feedback suppression and microphone EQ
- Saved DSP preset file and written settings
- Lighting scene notes where DMX is installed
- Follow-up review after the first live session
Buyers installing a used KTV package themselvesVenues with a new room and no resident engineerRental operators adding a preset for a new venueInstallers needing a second opinion on tuning
What remote tuning can and cannot fix
Remote tuning is effective when the equipment is installed correctly and the signal path is known. It can fix gain structure, feedback, preset levels and lighting scenes. It cannot fix a wrong speaker position, damaged cable or an amplifier that is too small for the cabinets.
Before the call we send a short checklist: model numbers, cable map, amplifier settings and room photos. If something in that list is wrong, we tell you before booking the session rather than charging for a call that cannot solve the problem.
- Pre-call checklist catches installation errors
- Preset and gain work is done live
- Hardware problems flagged before booking
How a tuning session runs
The session uses a video call with the room visible and a second device connected to the DSP or mixer. We walk through input gain, output limits, microphone EQ and feedback control in a fixed order, then test at background, normal and peak levels.
At the end you receive the saved preset and a one-page settings sheet. The sheet matters because staff change settings; a written reference lets the room be restored without another call.
- Fixed order: gain, limits, EQ, feedback, scenes
- Three-level listening test
- Saved preset plus one-page settings sheet
Support after the first live session
We include one follow-up review after the room has run a real event. Small adjustments after a live session are normal, especially for microphone gain and lighting scenes, and they are easier to make with real feedback than with a test tone.
For rental operators, we can build a small preset library for the room sizes you use most, so each new venue starts from a known baseline instead of a blank processor.
- One follow-up review included
- Preset library option for rental fleets
- Written notes rather than memory
Câu hỏi của người mua
What do I need for a remote tuning session?
You need the system powered and installed, a video call device, a way to connect to the DSP or mixer, and the pre-call checklist completed. We confirm the connection method before the session.
Can you tune a system you did not sell?
Yes, as long as the equipment is working and the signal path is documented. We review the checklist first; if the issue is a hardware fault or installation error, we explain what needs to change before tuning.
Is a preset file included?
Yes. Where the processor supports export, you receive the saved preset file plus a one-page written settings sheet. Both are yours to keep and reuse on the same model.
Sản phẩm
Âm thanh chuyên nghiệp đã kiểm tra, giá hợp lý và giao hàng toàn cầu.
Bài đọc liên quan
- Karaoke room opening for holiday season: lead time and checks
- Cloud karaoke song library vs local: KTV venue buyer's guide
- AI voice enhancement karaoke: what venue owners should expect in 2026
- Ghép công suất ampli với loa passive cũ
- Bảo hành 30 ngày cho thiết bị âm thanh chuyên nghiệp đã qua sử dụng
- Bàn điều khiển số cũ tốt nhất
Hệ thống trọn bộ
Remote tuning support for used KTV audio systems: gain structure, feedback control, DSP presets and lighting scenes set up over a video call, with written settings you can keep.